User Interface
Interfaces to the FrameSaver 9120
Access Unit's Faceplate
Async Terminal User Interface
Network Management
9121-A2-GB20-20
Your interfaces to the FrameSaver 9120 access unit are the front panel LEDs, the
menu-driven user interface, and SNMP (simple network management protocol)
network management. These interfaces provide feedback and status for the
access unit and, if installed, the dial backup module (DBM).
This chapter tells you how to set up and navigate the menu-driven user interface.
The access unit's faceplate includes 12 LEDs (light-emitting diodes). See
Maintenance and Troubleshooting
Chapter 5,
LED indicates.
Access to the easy to use, menu-driven interface is provided through an async
(asynchronous or other VT100-compatible) terminal, PC terminal emulation, or a
Telnet session. This guide focuses upon using this menu-driven user interface.
Acting as an SNMP agent, the access unit supports external management by an
SNMP manager via industry-standard and enterprise-specific management
information base (MIB) objects. Refer to the FrameSaver 9120 Technical
Reference for supported MIB objects.
, for an understanding of what each
May 1998
2
2-1