Paradyne FrameSaver 9120 User Manual page 39

9121-A2-GB20-20
Message What It Indicates
ISDN Test Active An ISDN test has been
initiated by the ISDN
network and is currently
active.
Lamp Test Active The Lamp Test is active,
causing the LEDs on the
faceplate to flash on
and off.
Mon Pttn, Access unit is monitoring
1
DLCI nnnn , the selected test pattern on
3
interface the specified DLCI for the
interface.
When status is Active, the
amount of time the test has
been running and the
number of errors during that
time are displayed.
3
Mon Pttn, interface Access unit is monitoring
the selected test pattern on
the network or DSX-1
interface.
When status is Active, the
amount of time the test has
been running and the
number of errors during that
time are displayed.
1
nnnn indicates a DCLI number of 16 through 1007.
2
A count of 99999+ means that the maximum number of errors has been exceeded.
3
interface is Network, DSX-1, Port-1, Port-2, or the basic rate interface B-channel.
May 1998
Displaying System Information
What To Do
Allow the test to continue.
Call your ISDN service
provider.
Allow the test to continue or
abort the test.
Press Return ( ) while the
test is selected (via the
Command column) on the
Device Tests screen ( Path:
main/test/device) to activate or
deactivate the test.
Continue monitoring test.
Press Return ( ) while the
test is selected (via the
Command column) on the
interface's PVC Tests screen
( Path: main/test/ [network/
port-1/port-2/BRI] _ pvc ) to
activate or deactivate the test.
2
Allow the test to continue or
abort the test.
Press Return ( ) while the
test is selected (via the
Command column) on the
Network or DSX-1 Physical
Tests screen ( Path: main/test/
[network/dsx] _ phy) to activate
2
or deactivate the test.
4-13