Paradyne FrameSaver 9120 User Manual page 41

9121-A2-GB20-20
Message What It Indicates
Send Pattern, Access unit is sending a
1
DLCI nnnn , selected test pattern on the
3
interface
specified DLCI for the
interface.
When status is Active, the
amount of time the test has
been running and the
number of errors during that
time are displayed.
3
Send Pttn, interface Access unit is sending a
selected test pattern on the
network or DSX-1 interface.
1
nnnn indicates a DCLI number of 16 through 1007.
2
A count of 99999+ means that the maximum number of errors has been exceeded.
3
interface is Network, DSX-1, Port-1, Port-2, or the basic rate interface B-channel.
May 1998
Displaying System Information
What To Do
Allow the test to continue.
Press Return ( ) while the
test is selected (via the
Command column) on the
interface's PVC Tests screen
( Path: main/test/ [network/
port-1/port-2/BRI] _ pvc) to
activate or deactivate the test.
2
Allow the test to continue.
Press Return ( ) while the
test is selected (via the
Command column) on the
Network or DSX-1 Physical
Tests screen ( Path: main/test/
[network/dsx] _ phy] ) to
activate or deactivate the test.
4-15