Training Contents - Festo 696688 Manual

Introduction
1.1

Training contents

54
Training contents can be covered dealing with the following areas:
• Mechanics
Mechanical construction of a station
–
• Process technology
Reading and preparation of flow diagrams and documentation
–
Piping up of process engineering components
–
System analysis
–
• Electrotechnology
Correct wiring of electrical components
–
• Sensor technology
Correct use of sensors
–
Measurement of electrical, process engineering and closed-loop control
–
variables
• Closed-loop control technology
Fundamentals of closed-loop control technology
–
Expansion of measuring chains into closed control loops
–
Analysis of controlled systems
–
Use of controllers
–
• PLC
Programming and use of a PLC
–
Structure of PLC program
–
• Commissioning
Commissioning of a process engineering system
–
Commissioning of a control loop
–
• Fault finding
Systematic fault finding on a process engineering system
–
Inspecting, maintaining and servicing of process engineering systems ?
–
Topics for project work
• Closed-loop control technology
Temperature control
–
Controlled system with compensation and large time-constant
–
• Safety monitoring of containers
Use of a float switch
–
Use of level sensors
–
• Sensor technology
Connection of a temperature sensor, signal conversion
–
• Planning, realisation and documentation of conversions
© Festo Didactic 696688