Setting menu - setting the
backlighting (Backlight)
This function allows the rider to set the way display
colours are viewed according to NIGHT and DAY
modes.
Enter the setting menu (SETTING MENU).
Select "Backlight", by pressing button (1) or (2). Once
function is displayed, press button (4).
When entering the function, the display shows
available modes on the left side and current mode on
the right side (Fig 141).
The following indications will be displayed in this
page:
< Back
●
Day
●
Night
●
Auto
●
< Back
●
With buttons (1) and (2) it is possible to select the
desired display backlight.
Once the desired backlight is highlighted, press
confirm button (4) to memorise the new selection.
Pin Code
Lap
Backlight
Date and Clock
Units
< Back
Day
Night
Backlight
...
Auto
< Back
1
4
2
Fig 140
1
Auto
4
2
Fig 141
183