Setting the unit of measurement for speed
(Speed)
This function allows to change the units of
measurement of speed and hence even the ones of
distance travelled.
This page (Fig 149) shows currently set units of
measurement on the right side and the following
options on the left side:
< Back
●
km/h
●
mph
●
Default
●
< Back
●
"Default" indication is visible only if the set
parameter is different from the default parameter.
With buttons (1) and (2) it is possible to select the
desired measurement or "Default" to reset the
default unit of measurement.
Once the desired function is highlighted, press
button (4) to save the selected unit.
To exit the menu and go back to previous page
highlight the "< Back" indication and press button
(4).
< Back
Speed
...
Temperature
Consumption
< Back
km/h
Speed
... ...
mph
Default
1
4
2
Fig 148
1
km/h
4
2
Fig 149
193