Ducati Hypermotard 950 Owner's Manual page 169

The following indications will be displayed in this
page:
< Back
●
New Pin
●
Select "New Pin" (A) using button (1) and button (2)
and press button (4) to validate and enter the new
Pin Code.
To exit the menu and go back to previous page
highlight the "< Back" indication and press button
(4).
Note
If "Modify Pin" appears when accessing this
function, this means that there is already a stored
Pin Code and therefore the function is already active.
Entering the Pin Code (B):
After accessing the new Pin Code entering function,
the instrument panel displays "New Pin" with spaces
allowing to enter the four digits of the code: "0" and
"- - -".
The two arrows above and below the digit indicate
that it is possible to change the value using button (1)
and button (2).
Entering the code:
168
A
< Back
New Pin
...
B
New Pin
...
1
2
4
0 - - -
Fig 120