Displaying the stored laps
The laps previously stored can be displayed. The
information displayed is lap time, maximum rpm and
top speed.
To view the laps, enter (the SETTING MENU, use
buttons (1) and (2) to select "Lap" and press button
(4).
Then use buttons (1) and (2) to select "Lap Data" and
press button (4).
If there are no memorised laps, when accessing this
page the instrument panel will show "< Back" and
"No Lap".
To exit the menu and go back to previous page
highlight the "< Back" indication and press button
(4).
Off
On
Lap Data
...
Erase All
< Back
< Back
No Lap
...
1
4
2
Fig 134
4
Fig 135
179