Main Use And Maintenance Operations; Checking Coolant Level And Topping Up, If Necessary - Ducati Hypermotard 950 Owner's Manual

Main use and
maintenance operations
Checking coolant level and topping
up, if necessary
Check coolant level in the expansion tank on the
right side of the steering tube.
Check the level according to the intervals indicated
in the tables in "Scheduled maintenance chart".
Steer completely to the left and check that the level
is between the MIN and MAX marks on the side of
the expansion reservoir. Top up if the level is below
the MIN mark. Unscrew the filler plug (1) and add ENI
Agip Permanent Spezial antifreeze (do not dilute,
use pure), until reaching the MAX level.
Screw plug (1). This type of mixture ensures the best
operating conditions (the coolant starts to freeze at
-20 °C/-4 °F).
Cooling circuit capacity: 2.2 l (0.58 gal).
234
1
Attention
This operation must be performed with cold
engine. Failure to observe the above
recommendation may lead to coolant or hot vapour
leakage with possible consequent severe burns.
MAX
MIN
Fig 193