Furuno FAR-2167DS-BB Installation Manual page 19

Fixing without KB fixing plate
1. Drill four mounting holes of 5 mm diameter, referring to the outline drawing at the back of this
manual.
2. Fix the control unit with four screws (M4) from the under side of the desktop. (M4 screws with
a sufficient length for the thickness of the desktop should be provided locally.)
#70
# Minimum recommended service space
Mounting dimensions for control unit RCU-015/RCU-016
Mounting dimensions for control unit RCU-014
24
308±1
398
32
F1
F2
F3
F4
110±1
160
4-M4 (Fixing holes)
(bottom)
4-M4 (Fixing holes)
(REAR)
1-11