Furuno FAR-2117 Installation Manual page 58

3. SETTING AND ADJUSTMENT
7. Use the scrollwheel to set START and ANGLE, referring to the description and
example below. Spin the scrollwheel to set and push it to confirm.
A solid green line marks the dual radar display area.
• START: Start point of the sector (in degrees, 000-359)
• ANGLE: Width of the sector (in degrees, 000-359)
In the example below, START is 130° and ANGLE is 100°.
8. Select 5 COMBINE RANGE and push the left button.
9. Use the scrollwheel to set START and LENGTH, referring to the example below.
Spin the scrollwheel to set and push it to confirm.
• START:
• LENGTH: Set length of sector.
3-20
Width of sector
ANGLE
(Example: 100°)
Set range start point.
Push the right button four times to close the menu.
START
(Example: 130°)
START
LENGTH
Example:
START: 01.00 nm
LENGTH: 02.00 nm