Furuno FAR-2117 Installation Manual page 71

MJ-A3SPF0015-100 (10 m)
No.1
J614
Processor
unit FR-FTPC-CY (10/20/30 m)
(straight)
NETWORK
FR-FTPC-CY
No.2
(10/20/30 m)
Processor
(straight)
unit
No.3
Processor
unit
No.4
Processor
unit
Note: When two memory card interface units are connected via network, change ID code
for the second unit.
1. Remove the cover and set IP0 bit of the DIP switch S1 to ON on the CARDCPU board
03P9333.
2. Set INIT bit of S1 to ON and turn on the power of the radar. Wait till CR2 starts blinking.
Never turn off the power until CR2 starts blinking.
3. Turn off the power and set INIT bit to OFF.
CARDCPU board 03P9333
FR-FTPC-CY (10/20/30 m) (straight)
FR-FTPC-CY (10/20/30 m) (straight)
J314
S1
CR2
4. INSTALLING OPTIONAL EQUIPMENT
Memory card IF unit
12 VDC
NETWORK
FR-FTPC-CY (10/20/30 m)
(straight)
ON
IP0
IP1
IP2
INIT
(Default: all OFF)
two mini-cards
Switching hub
HUB-100
(option)
OFF
4-11