Fixing with KB fixing plate
1. Fix the KB fixing plate to the bottom of the control unit.
2. Attach cushions (three for RCU-014, two for RCU-015/016) to the bottom of the control
unit as shown below.
3. Fix it to a desired location with self-tapping screws (local supply).
Fixing without KB fixing metal
1. Drill four mounting holes of 5 mm diameter referring to the outline drawing at the back of
this manual.
2. Fix the control unit with four screws (M4) from under side of the desktop. (The M4
screws with a sufficient length for the thickness of the desktop should be provided
locally.)
#70
KB fixing plate
Side view for RCU-014/015/016
Control Unit RCU-014
24
32
F1
F2
F3
F4
RCU-015/016
Cushion
308±1
398
4-M4 (Fixing holes)
110±1
(REAR)
160
1. MOUNTING
4-M4 (Fixing holes)
(bottom)
1-11