Pro Vision BODYCAM 4 User Manual page 9

SETUP
Single Dock Mounting
The single dock can be placed on the desktop or can be mounted directly to a surface or with the
included mounting bracket.
Desktop Placement:
Place the dock directly on the surface with the top arrow facing the user's position so the camera's top
display is orientated correctly when docked.
Surface Mounting:
The dock can be directly mounted to a surface such as a vehicle
console or shelf. Locate the dock with the top arrow facing the
user's position so the camera's top display is orientated correctly
when docked. There are four screw holes in the bottom of the dock
for mounting; the included mounting bracket can be used as a hole
template for marking and drilling the holes. Use four of the
included mounting screws to mount the dock to the surface.
Bracket Mounting:
The dock can be mounted at a right angle to a mounting surface using the included right-angle mounting
bracket; the bracket can be used in multiple configurations to mount the dock. Locate the dock with the
top arrow facing the user's position so the camera's top display is orientated correctly when docked. The
bracket can be mounted with the right angle upward or downward, it can be mounted flush or extended,
and it can be mounted on the side, front, or back.
Side Mounted Front/Back Mounted
Single Dock Connections
The single dock can be used for charging only or for both charging and
video offload. For charging-only applications, only the USB-C charging
cable needs to be used and the Ethernet port can be left disconnected.
Power: Connect the included USB-C cable to the USB-C port on the side of the
dock and connect the USB Male connector to the USB wall charging
adapter.
For fastest charging, use only a 2.0A USB charging adapter; smaller
current adapters will take longer to charge the camera.
Network: Connect the included Ethernet cable to the LAN port on the side of the
dock and the opposite end into an active Internet port on your network.
Extended Front/Back
Mounted
6
PRO-VISION
BODYCAM 4 USER GUIDE
AMPS Mounting Hole Pattern
1.2" 30mm
1.5" 38mm
Downward
Upward
provisionusa.com
®