Molle Mount; Epaulette Mount - Pro Vision BODYCAM 4 User Manual

CAMERA MOUNTING
PRO-VISION
®
BODYCAM 4 USER GUIDE

Molle Mount

The Molle mount (P/N: BC4-MNT-MOL) is designed to attach to Molle vests and jackets.
The mount consists of an adapter that mounts to the rear of the camera and the Molle
mount that is attached to the Molle vest or jacket. The mount can be left attached to the
vest or jacket while the camera is removed for charging and upload. To attach the
camera, slide it down into the mount until it clicks. To remove the camera, rotate it 180°
and slide upward to remove as shown below at right.

Epaulette Mount

The epaulette mount (P/N: BC4-MNT-EPL) is designed to attach to the epaulette on the
shoulder of a uniform. This mount can only effectively be used if the uniform has
epaulettes. The mount consists of an adapter that mounts to the rear of the camera and
the mounting portion that is attached to the garment's epaulette. The mount can be left
attached to the vest or jacket while the camera is removed for charging and upload. To
attach the camera, slide it down into the mount until it clicks. To remove the camera,
rotate it 180° and slide upward to remove as shown below at right.
11 provisionusa.com