Pro Vision BODYCAM 4 User Manual page 8

SETUP
Windows Laptop with 4G connection:
Connect an Ethernet cable from the Ethernet port of the docking station to an open Ethernet port on
the in-vehicle laptop. The connection from 4G to the Ethernet will need to be shared within Windows
Internet Connection Sharing (ICS).
1. Open the Windows Network and Sharing Center and choose "Change adapter settings" on the
right.
2. In the Network Connections window, right-click on your 4G Cellular connection and choose
"Properties".
3. In your devices "Properties" window, choose the "Sharing" tab. In "Internet Connection
Sharing", check the box next to "Allow other users to connect through this computer's Internet
Connection" and then choose your "Ethernet" adapter that is connected to the docking station.
4. Click "Ok" to save the sharing properties and begin using Internet Connect Sharing. The dock
should now get an IP address from the laptop; the IP address will be on the default range of
192.168.137.xxx.
5
PRO-VISION
®
BODYCAM 4 USER GUIDE
provisionusa.com