Dvr-906Le In-Car System - Pro Vision BODYCAM 4 User Manual

REMOTE ACTIVATION

DVR-906LE In-Car System

The BODYCAM 4 can be activated by a signal from a PRO-VISION In-Car System (P/N: DVR-906LE).
This signal can be set to broadcast when a trigger on the In-Car system is active. It is typically configured
to be broadcasting when the overhead flashing lights are active but can be configured to be activated
from any of the systems triggers. To enable this functionality, the BODYCAM 4 must be set to be
triggered by In-Car systems in its configuration, and the in-car system must be set to broadcast a trigger.
In-Car System Configuration:
To enable the remote activation feature, connect to the
DVR unit and navigate to the "Remote Activation"
settings page.
1. Turn on the "Activate Remote Devices" switch
2. Choose the desired triggers that will activate
the cameras from the "Triggers" dropdown.
3. Press "Apply" to apply and save the changes.
Test the function by enabling the trigger; the "Remote
Activation Status" should change from "Idle" to
"Broadcasting".
19
PRO-VISION
®
BODYCAM 4 USER GUIDE
provisionusa.com