Camera Registration - Pro Vision BODYCAM 4 User Manual

SETUP

Camera Registration

After software setup has been completed, new cameras can be added.
SecuraMax Cloud Software
A software deployment with a PRO-VISION technician is scheduled upon purchase of SecuraMax. During
the deployment process the PRO-VISION technician will walk the administrator through the camera
registration process for the first few cameras.
After deployment, new devices can be easily added:
1. Open a web browser and log in to your SecuraMax administrator account.
2. From any SecuraMax web page, go to the "Admin" menu and the choose "Devices."
3. Click on the "Add BODYCAM 4 Device" from the left side menu of the "Devices" page.
4. Instructions for adding a new camera are provided on the page:
a. Remove the new BODYCAM 4 camera from its packaging and then
power it on by pressing and holding the power button for 3 seconds.
New / Unregistered cameras will display "NOT SETUP" on the top
LCD once powered on.
b. Hold the camera with the lens facing toward the QR codes displayed
on the screen at about 6-8" away and then press the "F1" button on
the side.
c. The camera will scan the QR code on the screen and then display
"SUCCESS" followed by "QR SAVED".
d. Place the camera in the docking station; the camera will chirp to note that it was docked,
and the display will change to "NOT ASSIGNED".
e. After a few moments, the camera serial number will appear in the "Step 3" section of the
web page, the camera user mode can be selected and for single user mode cameras, the
user can be assigned. For additional details on the "User Mode" options, see the
User Login
Press "Finish and Assign" to complete registration.
f.
PV Transfer Software
Customers that followed the setup guide provided with the PV Transfer software have already registered
new cameras following the registration instructions in the guide.
After initial setup, new devices can be easily added at any time:
1. Open a web browser on the server computer and navigate to the software web interface (typically
https://localhost:5004).
2. From the top menu, click on "Add BODYCAM" to navigate to the "Add a BODYCAM 4" page.
3. Instructions for adding a new camera are provided on the page:
a. Remove the new BODYCAM 4 camera from its packaging and then
power it on by pressing and holding the power button for 3 seconds.
New / Unregistered cameras will display "NOT SETUP" on the top
LCD once powered on.
b. Hold the camera with the lens facing toward the QR codes displayed
on the screen at about 6-8" away and then press the "F1" button on
the side.
c. The camera will scan the QR code on the screen and then display
"SUCCESS" followed by "QR SAVED".
d. Place the camera in the docking station; the camera will chirp to note that it was docked,
and the display will change to "NOT ASSIGNED".
e. After a few moments, the camera serial number will appear in the "Step 3" section of the
web page. Enter the desired name for the camera (Typically the name of the user the
camera will be assigned). Pay attention to formatting of the camera name as it will be
displayed on the camera's display and in every video filename from the camera.
Press "Finish and Assign" to complete registration.
f.
section of this guide.
9
PRO-VISION
®
BODYCAM 4 USER GUIDE
RFID
provisionusa.com