Fiber Optic Ethernet Port Specifications; Operating Environment - Siemens SIMATIC NET RUGGEDCOM RSG907R Installation Manual

Standard
IEEE 802.3
IEEE 802.3ad
IEEE 802.3ae
IEEE 802.3u
1588-2008
62439-2:2016
62439-3:2016
5.4

Fiber Optic Ethernet Port Specifications

The following details the specifications for fiber Ethernet ports that can be ordered
with the RUGGEDCOM RSG907R.
Note
•
•
Data Mode Connector Cable
Rate
(Mbps)
100 MM LC
100 MM LC
a
Typical.
5.5

Operating Environment

The RUGGEDCOM RSG907R is rated to operate under the following environmental
conditions.
Ambient Operating
Temperature
Ambient Storage Temperature
Ambient Relative Humidity
Maximum Altitude
a
Measured from a 30 cm (12 in) radius surrounding the center of the enclosure.
RUGGEDCOM RSG907R
Installation Manual, 02/2021, C79000-G8976-1387-12
10 Mbps
Ports
•
•
IEEE •
IEC •
IEC •
All optical power numbers are listed as dBm averages. To convert from average
to peak, add 3 dBm. To convert from peak to average, subtract 3 dBm.
Maximum segment length is greatly dependent on factors such as fiber quality,
and the number of patches and splices. Consult a Siemens sales associate when
determining maximum segment distances.
Wavelength
(μm) (nm)
Transmit Receive
50/125 1308
62.5/125 1308
ab
c
5.4 Fiber Optic Ethernet Port Specifications
100 Mbps 1000 Mbps Ports
Ports
•
•
•
•
•
Transmit
a
Power (dBm)
Min Max
1308 -22.5 -14
1308 -20 -14
-40 to 85 °C (-40 to 185 °F)
-40 to 85 °C (-40 to 185 °F)
5% to 95%
2000 m (6562 ft)
Technical Specifications
Notes
10Base-T
• Link aggregation
• 10GBase
100Base-TX/100Base-FX
• Precision Time Control
(PTP) Version 2
• Media Redundancy
Protocol (MRP)
• High-Availability Seamless
Redundancy (HSR), Parallel
Redundancy Protocol (PRP)
Receiver Receiver Distance
Sensitivity Saturation
(dBm) (dBm)
-31 -14
-31 -14
Power
a
(km) Budget
2 11
2 11
33