Electrical Connections - Dean D20 Series Installation And Operation Manual

3.7 Electrical Connections

The fryer when installed must be electrically grounded in accordance with local codes, or in the
absence of local codes, with the appropriate national or European Community (CE) standards.
This fryer is equipped with a three-prong (grounding) plug for protection against
electrical shock and must be plugged directly into a properly grounded, three-prong
receptacle. DO NOT CUT, REMOVE, OR OTHERWISE BYPASS THE GROUNDING
The rating plate and wiring diagram are located inside the front door. The fryer is equipped with a
230VAC single-phase 50-hertz system (International/CE). Do not cut or remove the ground prong
from the power cord plug. Do not attempt to use the fryer during a power outage.
This appliance requires electrical power for operation. Place the gas control valve in
the OFF position in case of a prolonged power outage. Do not attempt to operate
DECATHLON SERIES GAS FRYERS (CE)
CHAPTER 3: INSTALLATION
DANGER
PRONG ON THIS PLUG!
DANGER
this appliance during a power outage.
3-11