External Parallel Controller Connection; External Video Editor Connection; Sync Signal (Word Clock) Connection; Ethernet Connection - Fostex DV824 Owner's Manual

<Note>: The FS of the receiving digital input signal must match the FS setting of the
unit. You can make the FS setting using the "Record FS/BIT" menu item of the "SYS
SETUP" menu in the MENU mode or the quick setup mode ( see pages 47 and 117 respec-
tively ).

External parallel controller connection

The DV824 provides the [PARALLEL REMOTE] connector (8-pin mini DIN), which is used for
connecting to an external controller. You can operate the following nine functions using the
external controller.
1 PLAY
2 STOP
3
RECORD
<Pin assignment>
Each transport control/function gets active by grounding the associated pin.
8
7 6
5 4 3
2 1
<Note>: Pin 7 (DC-12V) derives from the internal main power supply of the unit. If
you short-circuit it to ground or connect it to heavy load, the unit may heat up
abnormally. When using the [PARALLEL REMOTE] connector, connect to lighter load
and never short-circuit the pin.

External video editor connection

Using the [P2/ES BUSS INPUT] connector, you can control the DV824 from an external video
editor via RS422. The [P2/ES BUSS THRU] connector allows you to control more than one unit
from the editor (see page 71 for details).

Sync signal (word clock) connection

The DV824 provides the [WORD INPUT] connector which is used to lock the DV824 to an
external digital device. The connector accepts a word clock from an external device.
The DV824 also provides the [WORD OUTPUT] connector which feeds a word clock to an
external device.

Ethernet connection

The DV824 is equipped with the ether card and provides the RJ-45 connector which supports
100/10BASE-T FTP.
By connecting the unit to your PC via a LAN cable and setting up the unit as an "FTP (File
Transfer Protocol" server, you can transfer audio files between the unit and PC over TCP/IP.
An appropriate FTP client application is used for file data transfer (see page 73 for details).
REWIND
4
F. FORWARD
5
CUE point entry
6
SHIFT+STOP
PLAY
1
STOP SHIFT+REC
2
REC
3 SHIFT+REW
GND SHIFT+FF
4
5 SHIFT
6 REW
7 (*) VDD (12V), Max. 500mA
VBATT*
The power voltage is supplied while the unit's
FF
8
power is on.
39
DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824
PAUSE
7
8 SKIP/CURSOR
9 SKIP/CURSOR
CUE
PAUSE
SKIP/CURSOR
SKIP/CURSOR