Basic Connection; Analog Audio Input Connection; Digital Audio Input Connection - Fostex DV824 Owner's Manual

Fostex dvd multitrack recorder owner's manual dv824
Hide thumbs Also See for DV824:
Table of Contents

Advertisement

DVD Multitrack Recorder DV824
DVD Multitrack Recorder DV824
DVD Multitrack Recorder DV824
DVD Multitrack Recorder DV824
DVD Multitrack Recorder DV824
Analog audio device
8
7
6
ANALOG INPUT BALANCED [+4dBu]
1:GND 2:HOT 3:COLD
ANALOG OUTPUT BALANCED [+4dBu]
8
7
6
Analog audio device
Analog audio connection
The DV824 provides eight balanced XLR-3-31-type [ANALOG INPUT] connectors which accept
+4 dBu analog audio signals.
The number of recording tracks can be set using the "Record Tracks" menu item of the "SYS
SETUP" menu in the MENU mode (see pages 48 and 117 respectively). The available options are
1 (mono), 2, 4, 5, 6 and 8 (the default is "8").
The DV824 also provides eight balanced XLR-3-32-type [ANALOG OUTPUT] connectors which
output +4 dBu analog audio signals.
Digital audio connection
The DV824 accepts digital signals conformed to IEC 60958 (AES/EBU) or IEC 60958 (S/P DIF)
format (the format of the digital source is automatically detected). The digital connection is
made via the D-sub 25-pin DIGITAL I/O connector.
To record a digital audio source, connect a digital source to the [DIGITAL I/O] connector, and
set the "Select Input" and "Setup digital in" menu items of the "SYS SETUP" menu in the MENU
mode appropriately.
"Select Input" must be set to "Digital" (the default is "Analog"), while "Setup digital in" should
be set appropriately depending on the situation (see pages 45 and 119 respectively). The latter
can be set in pair channels and the default settings of four pairs are all "Digital".
When the DV824 receives a digital source from the selected channels, PLL (Phased-locked
loop) activates and locks to the input sync signal.
The DV824 also outputs digital signals conformed to IEC 60958 (AES/EBU) or IEC 60958 (S/P
DIF) format. The format of the digital output signal can be selected using the "Digital out"
menu item of the "SYS SETUP" menu in the MENU mode (the default is "ABS/EBU"). (See page
120 for details.)

Basic connection

Controller
PARALLEL
5
4
3
2
1
REMOTE
75
ON
5
4
3
2
1
DIGITAL I/O
Digital audio device
Digital audio device
Video editor
P2/ES BUSS
THRU
INPUT
100
ON OFF
WORD
WORD
INPUT
OUTPUT
OFF
ETHERNET
TX/RX
LINK
Digital audio device
Personal computer/LAN
38
Digital audio device
DC-IN 12V
1:GND
2:NC
3:NC
4:12V

Advertisement

Table of Contents
loading

Table of Contents