Time Display Mode Selection; Headphone Monitor Selection - Fostex DV824 Owner's Manual

Time display mode selection

The 7-segment time display shows time data in the currently selected time
mode. You can select the time mode between the following using the [TIME SEL/
CONTRAST] key. By default, time data is shown in the "LTC" mode when the
unit is turned on.
LTC
The time display shows LTC currently being played back or recorded in "h:m:s:f"
LTC
format.
When the optional TC/SYNC card is installed, the time display shows external time
code fed to the [TIME CODE INPUT] connector in "h:m:s" format. In the frame field,
TC IN
the frame rate (24, 29, etc.) of the receiving time code is shown.
When the optional TC/SYNC card is not installed, "--H --M --S --F" is shown.
The time display shows ABS currently being played back or recorded in "h:m:s:f"
ABS
format.
When the optional TC/SYNC card is installed, the time display shows time code
generated by the internal TC generator in "h:m:s:f" format only if "Gen mode" is set
to "Free Run" (see page 128 for details about "Gen mode" setting).
GEN
<Note>:
--F" is shown.

Headphone monitor selection

You can select the headphone monitor source using the rotary switches in the
PHONES section.
SOLO Monitors a solo track (1 to 8) selected by the [SOLO] select switch.
Monitors all available tracks in mono.
MONO
Monitors all available tracks in stereo (odd tracks to L, even tracks to R).
TR ODD-EVEN
TR7-8 Monitors tracks 7 and 8.
TR5-6
Monitors tracks 5 and 6.
TR3-4
Monitors tracks 3 and 4.
Monitors tracks 1 and 2.
TR1-2
TC IN
H M
When the optional TC/SYNC card is not installed, "--H --M --S
TR ODD- MONO
EVEN
TR7-8
TR5-6
TR3-4
MIN MAX
TR1-2
PHONES
51
DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824
ABS
S F
SOLO
TR2
TR3
TR1
TR4
TR5
TR6
TR7
TR8
GEN