Ltc Start Time Editing [Edit Ltc Start] - Fostex DV824 Owner's Manual

DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824
3) Edit the time value to the desired value, and press the [ENTER/YES] key to confirm your
setting.
Use the [MENU] dial (or the alphanumeric keys) to enter a desired value and use the
[SKIP/CURSOR
The setting is stored to the Flash ROM of the unit.

LTC start time editing [Edit LTC start]

Using the "Edit LTC start" menu item, you can set the desired LTC start time of a playback
audio file. The LTC start time is recorded to the currently load file.
<Note>: The DV824 records only the start time of LTC, and the internal gen-
erator generates and outputs LTC with reference to the start time.
On a "BWF" file, the start time is recorded as "Time Reference" in "Broadcast
Audio Extension Chunk". Therefore, if you want to use this LTC in Digidesign
Pro Tools, export the audio file to Pro Tools and make "User Time Code" effec-
tive.
1) Select the "Edit LTC start >" menu item and press the [ENTER/YES] key.
The LTC start time recorded on the current file is shown.
2) Press the [ENTER/YES] key again.
Initially, the subframe value flashes and you can now edit the LTC start time.
3) After editing the start time, press the [ENTER/YES] key to confirm your setting.
Use the [MENU] dial (or the alphanumeric keys) to enter a desired value and use the
[SKIP/CURSOR
] keys to move the cursor position.
] keys to move the cursor position.
132