Controlling The Unit From A Video Editor; Necessary Setting (Rs422 Setup Menu); Rs422 Remote Setting; Device Type Setting - Fostex DV824 Owner's Manual

Controlling the unit from a video editor

The following describes necessary settings for controlling the DV824 from an exter-
nal video editor via P2/ES BUSS (RS-422).
8 7
1:GND 2:HOT 3:COLD
8 7

Necessary setting (RS422 SETUP menu)

To control the DV824 from an external video editor, etc., you must make necessary settings
via the "RS422 SETUP" menu of the MENU mode by following the procedure below.
1) While the unit is stopped, press the [ENTER/YES] key to enter the MENU mode.
2) Use the [MENU] dial to select the "RS422 SETUP" menu and press the [ENTER/
YES] key.
The display now shows the RS422 menu screen for selecting a menu item.
By using the [MENU] dial to select a desired menu item and pressing the [ENTER/
YES] key, you can make setting for the menu item. See the following for details of
setting for each menu item.

RS422 remote setting

You can select from among "Both" (default), "Local" and "Remote".
Use the [MENU] dial to select the desired option and press the [ENTER/YES] key to
confirm your selection.
Both
Local
Remote
HOUSE SYNC
Video Sync
Video Editor
1 PARALLEL
6 5 4 3 2
REMOTE
ANALOG INPUT BALANCED [+4dBu]
75
ANALOG OUTPUT BALANCED [+4dBu]
ON
6 5 4 3 2 1
DIGITAL I/O AES/EBU
Audio signal
Digital Mixer
(Selection of the device(s) controlling the DV824)
You can control the unit from both panel keys and RS422 remote. This is the default setting.
You can control the unit from panel keys. RS422 remote control is disabled.
You can control the unit from RS422 remote. Panel key control is disabled.
71
DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824 DVD Multitrack Recorder DV824
Video Sync
RS422
RS422
P2/ES BUSS
THRU
INPUT
100
ON OFF
TIME CODE
INPUT
OUTPUT
WORD
WORD
INPUT OUTPUT
LEVEL SEL BI-PHASE INPUT
5V 24V
OFF
ETHERNET
TX/RX LINK
Word
VTR
DC-IN 12V
1:GND
2:NC
3:NC
4:12V
Audio signal