Lane Departure Alert Warning Lamp; Intelligent Start/Stop System Indicator Lamp; Auto Hold Indicator Lamp - MG Gloster Manual

Lane Departure Alert Warning Lamp

With the ignition switch placed in ON position, when the
lane departure alert is in standby state, the "Lane Departure Alert
Warning Lamp (whiter)" illuminates.
When the lane departure alert is in operating state, the "Lane Departure
Alert Warning Lamp (green)" illuminates.
When the lane departure alert is in operating state and gives an alarm,
the "Lane Departure Alert Warning Lamp (yellow)" blinks.
When the lane departure alert is in off state or has a malfunction the
"Lane Departure Alert Warning Lamp (yellow)" illuminates.
If the warning lamp illuminates yellow when the lane departure alert is
on, it indicates that the lane departure alert has a malfunction, please
contact our Service Dealer for service as soon as possible. Please Refer
to "Driver Assistant System" in the Starting and Driving section for
more information.

Intelligent Start/Stop System Indicator Lamp

With the ignition switch placed in ON position,
turn on the start/stop system, when the start/stop conditions are not
met, the "Intelligent Start/Stop System Indicator Lamp (white)"
illuminates.
BEFORE YOU DRIVE
With the ignition switch placed in ON position, turn on the start/stop
system, when the engine automatically stops, the "Intelligent Start/Stop
System Indicator Lamp (green)"
With the ignition switch placed in ON position, turn on the start/stop
system, when the start/stop system has a malfunction, the "Intelligent
Start/Stop System Indicator Lamp (yellow)"
Please Refer to "Intelligent Start/Stop System" in the Starting and
Driving section for more information.

AUTO HOLD Indicator Lamp

With the ignition switch placed in ON position, turn on the
AUTO HOLD, the "AUTO HOLD Indicator Lamp (green)" illuminates;
when the AUTO HOLD is activated, the "AUTO HOLD Indicator Lamp
(green)" blinks.
AUTO HOLD has the memory capability. When the AUTO HOLD is
on, after the driver unbuckles the seat belt, the "AUTO HOLD Indicator
Lamp (green)" goes out, but the On state is still memorized by the
AUTO HOLD system. When the AUTO HOLD is on, the vehicle speed
exceeds 3 km/h and the seat belt is not fastened, the "AUTO HOLD
Indicator Lamp (green)" illuminates to remind the driver that the AUTO
HOLD On state has been recalled, and the AUTO HOLD can be
activated just by fastening the seat belt again. When the AUTO HOLD is
illuminates.
illuminates.
63