Shutdown And Startup Of Engine - MG Gloster Manual

Shutdown and startup of engine

Vehicles with automatic transmission
Please conduct a full braking to the vehicle; after the vehicle is stationary,
keep depressing the brake pedal to shut down the engine (engine stop
phase). Meanwhile, the "Intelligent
Start/Stop System Indicator lamp {green)"
center of the instrument cluster illuminates.
Once the brake pedal is released, the engine will be started again. If the
parking assist function is activated, the engine will re-started only when
the accelerator pedal is depressed. The indicator lamp goes out.
116
STARTING AND DRIVING
Additional information about the vehicle with automatic
transmission
• Only when the shift lever is in D position will engine be shut down.
• If the shift lever is moved out of the D position during the engine stop
phase, the engine will be started again.
on the information • Regardless of whether the engine is shut down or not, you can reduce
or increase the braking force at your own. For stop-and-go driving or
cornering, if the brake is slightly depressed, the engine will not stop
while the vehicle is stationary. Once the brake pedal is depressed
hard, the engine will be shut down immediately.
When the engine is shut down, please depress the brake pedal to
avoid vehicle slip. If the engine intelligent start/stop system switch
engine will get started automatically. If the driver door is opened or
the driver seat belt is unfastened, the engine will not get started
automatically; to start the engine, please move the shift lever to P or
N position, and then start the engine with the start button or key.
Caution
on the floor console is pressed during the engine stop phase, the