Seat Belt Pretensioner; Airbag - MG Gloster Manual

Seat Belt Pretensioner

Do not damage or repair the pretensioner. As it contains
the ignition device, so it can only be repaired by our
Service Dealer.
The pretensioner will be invalid once being activated, so
it must be replaced. Ensure that our Service Dealer has
checked and repaired the pretensioners and all seat belt
components after the collision.
The seat belt pretensioner works with the airbag to reduce the risk of
injury caused by the frontal impact. Refer to "Airbag" in this chapter for
BEFORE YOU DRIVE

Airbag

None protection device is absolutely safe, when used to
avoid the occurrence of serious collision, it may result in
the personal injury or death. Even though the seat belt is
worn properly and the airbag is inflated, it may also
result in the personal injury or death.
When inflated, some components of the airbag will be
hot, so do not contact it before cooling down.
Airbag inflation may lead to the occupant facial
abrasions or other injuries, such injuries can be
minimized only if you and your occupants wear the seat
belt.
The driver seat should be adjusted to the back as far as
possible without affecting your driving.
Always hold the steering wheel rim, so that the airbag
would not be interfered when inflating.
Do not put any accessory (eg. mobile phone holder, cup
base, tray) on the steering wheel cover or the airbag
cover plate of the instrument panel, also do not paste (or
insert) any objects onto the airbag module cover.
Otherwise, it will affect the airbag inflation, or these
objects will be blown to any area of the interior when the
39