Automatic A/C Front Control Panel - MG Gloster Manual

Automatic AJC Front Control Panel
1 AUTO button
2 MODE button
3 Front NC air volume - selection button
4 Front NC air volume + selection button
5 OFF button
6 SYNC button
7 Left temperature selection knob
8 NC button
9 Front defrost button
10 Rear defrost button
11 Internal/external circulation button
12 Rear NC control button
13 Right temperature selection button
BEFORE YOU DRIVE
AUTO button
This is the automatic air conditioning control mode button.
Press the AUTO button to enter the fu II AUTO state, each control will
enter the automatic working state, the AUTO indicator illuminates, in
the full AUTO state, press the AUTO button again to disable it.
In the AUTO state, operate the MODE, air volume, NC buttons, the
panel will exit the full AUTO state, the AUTO indicator goes out, and
the relevant functions enter the manual control state, while other
functions that are not operated remain in auto control.
In the AUTO state, operate the temperature control knob, the panel
still remains in the full AUTO state, and the AUTO indicator stays on.
In the AUTO state, operate the internal/external circulation button, the
relevant functions enter in the manual control state, the AUTO
indicator stays on, while other functions that are not operated remain in
auto control.
In the AUTO state, operate the front defrost button, the NC enters the
front defrost state, and the AUTO indicator goes out.
MODE button
Adjust the air distribution mode. If MODE button is pressed in the ON
state, NC will switch to the Distribution to Face, Distribution to Face
and Feet, Distribution to Feet, Distribution to Feet and Defrost mode in
turn, and the infotainment display will display the information about the
related air distribution mode.
83