Intelligent Semi-Automatic Parking Assist System - MG Gloster Manual

Intelligent Semi-Automatic Parking Assist
System
The system is a parking assist system, which is not
applicable in all cases, and can not completely replace
the driver in driving and judgment, even if the system is
running, the driver must be careful in driving and
judgment, to avoid the risk of collision (Intervene
steering wheel and brake if necessary).
Pull-In function (with D gear is selected)
1 Press the automatic parting switch
the parking mode, the default is right-side parallel parking mode,
press the again to switch to perpendicular parking mode, after
selecting the mode, it will enter the parking space search interface.
2 Choose left-side or right-side parking space search by turning on the
turning signal lamps, search in the forward direction according to the
instrument cluster information center display, and the parting assist
156
STARTING AND DRIVING
on the floor console to select
system searches for the parking space and determines whether the
space is spacious enough; when an appropriate parting space is found,
it will display the Parking Space Found interface, then the vehicle
movement direction will be displayed in the instrument cluster
information center interface.
3 Make gear shifts and control brake according to the prompts on the
instrument cluster information center.
4 Park the vehicle, the instrument cluster information center shows
"Parking Success• after the vehicle is successfully parked.