ANDELI TIG Series Instruction Manual page 5

 Touching electric parts is forbidden.
 Ensure to invite professional electrician to ground the welding machine with copper
conductor with specific cross section.
 Ensure to invite professional electrician to connect power source in welding machine
with copper conductor with specific cross section. The insulating sheath cannot be
damaged.
 Ensure to insulate the body and base metal when working in the wet and restricted area.
 Please use safety net when working at heights.
 Please close the input power when not in use.
Avoid welding fume and gas damaging human body
 Ensure to use specified exhaust equipment to avoid gas poisoning and suffocation.
 The protective gas will be deposited around the container bottom to cause suffocation.
Pay attention to the ventilation.
Avoid welding arc, splash and welding slag damaging human body
Ensure to wear protective glasses with enough overshadow. The arc will result in ocular

inflammation and the welding splash and slag will burn eyes.
Ensure to use protective supplies for welding, such as leather protective gloves, caftan,

cap, welding spats and apron to avoid welding arc light, welding splash and slag
burning skin.
Avoid fire, explosion and fracture and other accidents
 The welding place cannot have the combustibles because splash and hot weld joint will
result in fire.
 The cables and base metal must be connected firmly, or else, it may be heat to result in
fire.
 Must not weld in the combustible gas or container with the combustibles, or else, it may
result in explosion.
- 4 -