Table of Contents
Advertisement
TOPlus mini / TOPlus premium pull-back
Removal
10.3.1 Removal of the variant with direct screw connection
10.3.2 Removal of the variant x-times with axial screw connection
96
INFORMATION
To be able to remove the changing part, it may be nec-
essary to remove the clamping element first.
1.
As described in the »Preparing the machine for re-
moval« chapter, prepare for the following steps.
2.
Move the clamping device into release position.
1.
Unscrew the changing part from the product using its
thread.
1.
Unfasten and remove the fixing screws on the changing
part.
Order hotline +49 7144.907-333
Advertisement
Table of Contents
