Table of Contents
Advertisement
Carefree of Colorado
I
- B
NSTALLATION
C
C
OMPONENT
HECKLIST
11
13
12
9
2a
2
3
I
D
TEM
ESCRIPTION
Deflector Assy
1
Bracket, Deflector Assy
2
2a Shim, 1/4", Deflector Bracket
3
Cover, Bracket, Deflector Assy
4
Roll Bar Assy
5
Screw, Self Drilling, HWH
6
Screw, Self Drilling, HWH
7
Screw, HWH, Thread Type A
8
Screw, Socket Head, Roll Bar (this screw shipped installed)
9
Screw, Socket Head, Cover (2 screws are shipped installed)
10 Screw, Self Tapping, HWH
11 Awning Rail
12 Lift Bar Assy
13 Bracket, Lift Bar Assy
14 Screw, Self Drilling, HWH
15 Screw, Self Drilling, HWH
16 Screw, HWH, Thread Type A
17 Screw, Self Tapping, #2 Phillips
18 Front Cover Assy
NOTES:
1. The Lift Bar and Front Cover Assemblies are optional and specified at time of order.
2. The lift bar assy is available in three sizes to accommodate various extensions. Short arms are
used for 12"-16.9" extensions, Mid-range is used for 17" – 26" extensions, longer arms are used for
26.1"-42".
3. Bracket Shim (item 2a) is optional and must be specified at time of order.
1.
Unpack the shipping cartons and remove the front cover (if
installed). The cover is attached by two (2) socket head screws (1
per end cap); back the screws out until the end of the screw clears
the edge of the cover. It is not necessary to remove the screws
from the end caps.
2.
The roll bar assembly is shipped in the deflector assembly.
Remove the allen head screw and save, D
Remove the left end of the roll bar then slide the right end out.
Remove packing material.
S
ASIC
UMMIT
4
1
8
Figure 2. Component Checklist
18
Remove and Save Roll Bar
Attach Screw (LH End Cap Only)
N
D
.
O
OT
ISCARD
Figure 3. Unpacking the Unit.
3
5
8
14
15
Q
TY
1
2
2
2
1
#12 x 1
10
#10 x 1
4
#10 x 3/4
51
1/4-20 x 3/4
1
1/4-20 x 1 1/2
4
#6 x 3/8
2
1
1
2
#12 x 1
6
#10 x 1
#10 x 3/4
12
#7 x 7/16
4
1
Back Out Front Cover Screws until
End of Screw Clears Cover (2 plcs)
052520-001r17
Table of Contents
S
UMMIT
6
7
9
10
16
17
SOK3004c
N
OTE
4
2
SOK3045
Advertisement
Table of Contents
