Table of Contents
Advertisement
Carefree of Colorado
I
R
NSTALLING THE
Polyrod
1/4-20 x 3/4
Screw
1.
Close the room if open.
2.
Unroll some of the fabric from the roll bar.
3.
Slide the polyrod and fabric into the awning rail. Center the fabric over the room.
4.
Roll up the slack material onto the roll bar.
5. Slide the right end of the roll bar into the right end cap then set the left end of the roll bar into the left
end cap. Attach with one (1) 1/4-20 x 3/4 socket head screw through the left end cap.
6. Remove the spring locking pin from the roll bar. This is located
on the right end of the roll bar.
7. Open and close the room to ensure that the fabric is rolling up
straight on the rollbar.
8. Secure the fabric to the awning rail using two #6 x 3/8 screws
through the rail and fabric.
9.
B
A
OLL
AR
SSEMBLY
Awning
Rail (ref)
Figure 13. Installing the Roll Bar Assembly.
Roll Bar Assy
9
Completed Assembly
1"
Awning Rail
Polyrod
#6 x 3/8
Screw
Fabric
Figure 14. Securing the Fabric.
052520-001r17
Table of Contents
S
UMMIT
SOK3011b
SOK3034a
Advertisement
Table of Contents
