Accessory Use - Maxi-Cosi MAGELLAN XP MAX Manual

Accessory Use

3
For Use in Rear-Facing or
Forward-Facing Mode
Easy-Out Harness Covers
Harness covers help provide comfort to the
neck. If the harness covers will not allow proper
positioning of the chest clip or interfere with
getting a tight enough harness fi t for a smaller
Front View
baby, remove and do not use.
Store until your child is large enough to use
these harness covers while maintaining a
properly fi tting harness.
To remove, see pages 57-60.
Back View
Easy-Out Buckle Cover
To install, slide buckle into opening in front of
buckle cover. Then be sure to slide buckle cover
itself through the buckle slot in only the seat
pad.
NOTE: Buckle cover only goes through slot in pad and NOT through
buckle slot in shell. It lays fl at underneath the pad as shown.
To remove, pull up on buckle cover and slide it off of the buckle and
pull it out of the buckle slot in the seat pad.
Only For Use in Rear-Facing Mode
Head and Back Pillow
The head and back pillow must be used
together.
To remove head pillow, pull it out from behind
the back pillow.
To remove back pillow, loosen the harness
straps and slide pillow out from behind the
harness straps.
Only For Use in Rear-Facing Mode
Small Infant Positioning Pillow
When used, the small infant positioning pillow
must be used with the back pillow.
This pillow helps position your infant in the seat in order to achieve
proper harness fi t.
To determine if the pillow is needed:
1. Place headrest in lowest position.
2. Place infant in car seat without the pillow.
3. Make sure the infant's bottom and back are fl at against the car seat.
Use Pillow if
Shoulder Harness
Slots are Above
Shoulders
Check often to see how much your infant has grown. Remove the infant
pillow once they can sit in the car seat without the infant pillow and the
harness slots are at or below their shoulders AND you can still achieve
a snug harness fi t.
To learn how to check harness tightness, see pages 53-55.
Removable Cup Holders
The cup holders are top-rack dishwasher
safe.
To remove, twist the cup holder counterclock-
wise. Pull it out of slot in shell.
To install, align tabs on bottom of cup holder
with slots in shell. Twist clockwise to lock in
place.
4
Do Not Use
Pillow if Shoulder
Harness Slots are
At or Below
Shoulders