Maxi-Cosi MAGELLAN XP MAX Manual page 28

All-in-one car seat
Table of Contents

Advertisement

49
Thread Connectors Through
5
the Forward-Facing Belt Path
As Shown
Thread the connector without the
adjuster through the
Facing Belt Path
as shown.
Thread the connector with the
adjuster closest to it through the
Forward-Facing Belt Path
on the right as shown.
Adjuster
Do not twist belt.
6
Finished Lower Anchor Belt Routing
7
Place Car Seat Forward-
Facing in Back Seat
8
Forward-
opening on the left
opening
Adjuster
9
Make Car Seat Flush Against
Vehicle Seat
Use either of the
red positions
to
make the car seat as fl ush against
the vehicle seat back as possible.
Vehicle seat back must be upright.
Do not refer to the Rear-Facing
Angle Indicator.
It does not apply to Forward-
Facing mode.
NOTE: If your vehicle seat has
a headrest that interferes with
achieving a fl ush car seat fi t,
check your vehicle owner's manual
to see if it can be removed, adjusted,
or if there are other possible seating
locations.
Loosely Attach Tether Hook to
Vehicle's Tether Anchor
Check your vehicle owner's manual
for specifi c tether anchor locations.
continued on next page
50

Advertisement

Table of Contents
loading

Table of Contents