Installing Easy-Out Harness Covers - Maxi-Cosi MAGELLAN XP MAX Manual

67
Torso Pad
Wrap torso pad around the top of shell.
From the back of the seat, tuck torso pad
fl ap into the shell.
Tuck pad in along the sides of shell.
On both sides of the seat, push pad tabs
into keyholes in shell and pull up to snap
tab into place.
Headrest Pad
Adjust the headrest to the highest
position.
Starting from the top of the headrest,
gently pull headrest pad onto headrest.
Make sure headrest airbags stay in place.
Slide harness straps into slots in pad.
Attach all of the headrest pad fasteners

Installing Easy-Out Harness Covers

Front View
.
Back View
With the front of the harness cover facing
you, slide it behind the harness straps as
shown.
The harness cover should form a "V" when
installed correctly as shown.
Undo headrest pad
fasteners. Lift up headrest
pad to locate harness clip
slot in shell.
Using your thumb, push
clip into slot until you hear
a "click".
Repeat for other side.
Fold down harness cover
and undo fastener. Place
harness strap in harness
cover as shown. Close
fastener.
Repeat for other side.
Attach headrest pad fasteners.
68