Tire Service Kit Components And Operation; Tire Service Kit Usage Precautions - Jeep CHEROKEE 2018 User Manual

Tire Service Kit Components And Operation

Tire Service Kit Components
1 — Sealant 5 — Mode Select
Bottle Knob
2 — Deflation 6 — Sealant Hose
Button (Clear)
3 — Pressure 7 — Air Pump
Gauge Hose (Black)
4 — Power Button 8 — Power Plug
(located on the
bottom side of the
Tire Service Kit)
190
Using The Mode Select Knob And Hoses
Your Tire Service Kit is equipped with the
following symbols to indicate the air or seal-
ant mode.
Selecting Air Mode
Turn the Mode Select Knob (5) to this posi-
tion for air pump operation only. Use the
Black Air Pump Hose (7) when selecting this
mode.
Selecting Sealant Mode
Turn the Mode Select Knob (5) to this posi-
tion to inject the Tire Service Kit Sealant and
to inflate the tire. Use the Sealant Hose
(clear hose) (6) when selecting this mode.
Using The Power Button
Push and release the Power Button (4) once
to turn on the Tire Service Kit. Push and
release the Power Button (4) again to turn Off
the Tire Service Kit.
Using The Deflation Button
Push the Deflation Button (2) to reduce the air
pressure in the tire if it becomes over-inflated.

Tire Service Kit Usage Precautions

• Replace the Tire Service Kit Sealant Bottle
(1) and Sealant Hose (6) prior to the expira-
tion date (printed at the lower right hand
corner on the bottle label) to assure optimum
operation of the system. Refer to "Sealing a
Tire with Tire Service Kit" section (F) "Seal-
ant Bottle and Hose Replacement".
• The Sealant Bottle (1) and Sealant Hose
(6) are a one tire application use and need
to be replaced after each use. Always re-
place these components immediately at
your original equipment vehicle dealer.
• When the Tire Service Kit sealant is in a
liquid form, clean water, and a damp cloth
will remove the material from the vehicle or
tire and wheel components. Once the seal-
ant dries, it can easily be peeled off and
properly discarded.