Tire Service Kit - If Equipped; Tire Service Kit Storage; Tire Service Kit Components And Operation - Jeep Cherokee 2018 Owner's Manual

Hide thumbs Also See for Cherokee 2018:
Table of Contents

Advertisement

checked with a torque wrench by your autho-
rized dealer or service station.
5. Lower the jack until it is free. Remove the
wheel chocks. Reassemble the lug wrench to
the jack assembly and stow it in the spare tire
area. Secure the assembly using the means
provided. Release the parking brake before
driving the vehicle.
6. After 25 miles (40 km), check the wheel bolt
torque with a torque wrench to ensure that all
wheel bolts are properly seated against the
wheel.
TIRE SERVICE KIT — IF
EQUIPPED
Small punctures up to 1/4 inch (6 mm) in the tire
tread can be sealed with Tire Service Kit. For-
eign objects (e.g., screws or nails) should not be
removed from the tire. Tire Service Kit can be
used in outside temperatures down to approxi-
mately -4°F (-20°C).
This kit will provide a temporary tire seal, allow-
ing you to drive your vehicle up to 100 miles
(160 km) with a maximum speed of 55 mph
(90 km/h).

Tire Service Kit Storage

The Tire Service Kit is stowed under the load
floor behind the rear seat.
1. Open the liftgate.
2. Lift the access cover using the load floor
handle.
Load Floor Handle
Tire Service Kit Components And
Operation
Tire Service Kit Components
1 — Sealant Bottle
5 — Mode Select Knob
2 — Deflation Button
6 — Sealant Hose
(Clear)
3 — Pressure Gauge
7 — Air Pump Hose
(Black)
4 — Power Button
8 — Power Plug (lo-
cated on the bottom
side of the Tire Service
Kit)
Using The Mode Select Knob And Hoses
Your Tire Service Kit is equipped with the follow-
ing symbols to indicate the air or sealant mode.
Selecting Air Mode
Push in the Mode Select Knob (5) and
turn to this position for air pump opera-
tion only. Use the Black Air Pump Hose
(7) when selecting this mode.
231

Advertisement

Table of Contents
loading

Table of Contents