Table of Contents Revision History ....................2 Introduction ....................2 1. Overview ......................2 2. Specifications ..................... 3 2.1. Power........................4 2.2. User I/F .........................5 3. Device Driver ..................... 6 4. Additional Documentation and User Support ............. 6 USB-106 (Ver.1.0)
Page 5
HuMANDATA will revise the diagram. When a problem can be solved only by replacing components or modifying the product, HuMANDATA will take back the product to replace it with a properly functioning product.
Introduction Thank you very much for purchasing our product of the USB-106. USB-106 is an evaluation board for FTDI’s FT600, USB 3.0 FIFO bridge IC. FT600 supports USB3.0 SuperSpeed 5Gbps and royalty-free drivers. It is very useful for developing USB 3.0 devices.
USB3.0 Cable (1.0 [m]) x 1 Accessories DIL 80-pin header (Cuttable) x 1 RoHS Compliance * There may be cases that these parts and specifications are changed. * Power saving function (suspend, standby, sleep and others) is not supported USB-106 (Ver.1.0)
User I/F, User I/F, No. 37/38 pin No. 39/40 pin Jumper [6-5] Jumper [4-3] on-board regulator USB bus-power (generated from 5 [V]) Jumper [8-7] Jumper [2-1] Setting Example (factory setting) Use USB bus-power and 3.3 [V] on-board regulator USB-106 (Ver.1.0)
Device driver is not included in the package. Please download the latest version from FTDI website. http://www.ftdichip.com/ 4. Additional Documentation and User Support The following documents and other supports are available at http://www.hdl.co.jp/en/spc/USB/usb-106 Circuit Schematics Pin Assignment … and more. USB-106 (Ver.1.0)