Summary of Contents for WATSON Edison Junior Power Pole
Page 1
ASSEMBLY Edison Junior Power Pole 360.394.1300 watsonfurniture.com V.22.0 2/2022...
Page 2
Edison Junior Power Pole Components Ceiling Bar Ceiling Bar Clamp Power Pole Cover 2 EDISON JUNIOR POWER POLE ASSEMBLY INSTRUCTIONS...
Page 3
Glide w/ 5/16-18 x ¾” Profile Cap Screw Cutting Screw Head Cap Screw, Black Long Stem (0001140) (0003016) (125285, Black) (059325) (125290, Zinc) Tools Electric Drill 3mm Hex Bit 4mm Hex Bit Phillips Bit 3 EDISON JUNIOR POWER POLE ASSEMBLY INSTRUCTIONS...
Page 4
Position Power Pole Align the power pole with the corresponding holes in the rail segment. 4 EDISON JUNIOR POWER POLE ASSEMBLY INSTRUCTIONS...
Page 5
Secure the power pole to the rail using (3) M6 X 12mm screws and (2) M4 X 8mm screws. M6-1.0 X 12mm Button M4 X 8mm Thread Head Cap Screw, Black Cutting Screw (125285, Black) (0003016) (125290, Zinc) 5 EDISON JUNIOR POWER POLE ASSEMBLY INSTRUCTIONS...
Page 6
Hook the ceiling bar on the 2’ ceiling grid and screw the clamp to the ceiling bars with one screw on each side. Note: ensure that ceiling system has required weight capacity. M6-1.0x12mm Low Profile Cap Screw (0001140) 6 EDISON JUNIOR POWER POLE ASSEMBLY INSTRUCTIONS...
Page 7
Hook the power pole onto the ceiling bar, and align the pole with the bracket at the desired position. Screw the pole to the ceiling bar using (4) screws. M6-1.0x12mm Low Profile Cap Screw (0001140) 7 EDISON JUNIOR POWER POLE ASSEMBLY INSTRUCTIONS...
Page 8
Power Pole Cabling Run the cables down from the ceiling through the pole and through the rail end. Continue to run cables as required. 8 EDISON JUNIOR POWER POLE ASSEMBLY INSTRUCTIONS...
Page 9
Secure Power Pole Cover Slide the cover onto the power pole from the outside and secure using the Glide. Glide w/ 5/16-18 x ¾” Long Stem (059325) 9 EDISON JUNIOR POWER POLE ASSEMBLY INSTRUCTIONS...