Download Print this page

WATSON SEVEN DESK Assembly Instructions Manual

Download this manual

SE V EN DES K

3-L E G DE SK AS S E M B LY I N STR U CTI O N S

V.2.0 4/16

INS-SN3LEGTABLE

Page 1 SE V EN DES K 3-L E G DE SK AS S E M B LY I N STR U CTI O N S V.2.0 4/16 INS-SN3LEGTABLE...
Page 2 3-LEG TABLE BASIC COMPONENTS Worksurface Switch Inset Undermount Wellness Support Rails Legs Alligator Clips Power Cable Control Box Feet Motor Cable FASTENERS TOOLS #2 Phillips M6-1x12mm Button Head #10x¾” Pan Head Wood #8x⅝” Truss Head Socket Cap Screw, Black Screw (127000) Panhead Screw (122800) (125290) 5/32”...
Page 3 Swi tch Assemble on a clean blanket or carpet. Push switch into pocket on the top side of the surface. Lay the worksurface face side down. Two-P i ec e Wo rk s urf a ces Join the two halves with Tite Joint fasteners. Secure the support channel with ¼-20x⅜”...
Page 4 Le gs + Sup p o rt Rai l + Feet Place legs into support rails. Attach the support rail to the legs. then attach each foot to the legs with M6-1x12mm button head screws (x36). Contro l Box + Wi res Attach the motor cables and power cable to control box.
Page 5 Conne c t Sw it c h Position the worksurface on or near the leg frame and connect the switch through the rail opening. Align the worksurface and secure with ¼-20x⅜” Phillips Pan Head Machine Screw (126665 x18). Note — Clear all cables from the rail edge to prevent pinch when securing the worksurface.
Page 6 Not es Seven 3-Leg Desk Assembly INS-SN3LEGTABLE...