Table of Contents
Advertisement
TROUBLESHOOTING
Check to make sure all power sources are disconnected
before starting any troubleshooting. Safety gloves and glasses
should be worn when working on the unit. Serious injury or death
may occur if safety precautions are not followed.
Light Issue (Not turning
on)
Motor Issue (Only one
working motor)
Burnt/melted control
switch
Speed levels not
working correctly
Unit lacking smoke
intake
Unit showing no power
indication
Unit making humming
noise
TROUBLESHOOTING
WS-55 Series
1. Replace old defective light with new light.
1. Replace the defective motor with new motor.
1. Complete Control switch replacement is required.
1. Complete Control switch replacement is required.
1. Make sure a reducer has not been installed.
1. Make sure the power source is working properly.
2. All wiring is connected.
1. Replace defective capacitor with new one.
Advertisement
Table of Contents
