Troubleshooting; Part List / Replacement - Windster RA-7636SS User Manual

TROUBLESHOOTING

12
TROUBLESHOOTING
WARNING!!!
Check to make sure all power sources are disconnected
before starting any troubleshooting. Safety gloves and glasses
should be worn when working on the unit. Serious injury or death
may occur if safety precautions are not followed.
RA-76 Series
1. Locate and replace defective LED fixture.
Light issue (All not
2. Complete Control Board replacement may be
turning on)
required
Single LED fixture 2. Replace defective LED fixture with new LED
defective (All not turning fixture.
on)
1. Confirm articles have not fallen near motor area or
Loud Noise coming from
in Motor Housing.
motor housing
2. Ensure fans are strongly secure.
Touch Panel Control
1. Complete control switch replacement is required.
Switch not working
2. Control Board Replacement may be required
correctly
Burnt / melted control
1. Complete control switch replacement is required.
switch
1. Complete control switch replacement is required.
Speed levels not
2. Control Board replacement may be required.
working correctly
1. Check ducting for foreign objects.
Unit lacking smoke
2. Ensure ducting is properly sealed.
intake
3. Maintain Filter clean to increase airflow.
1. Make sure the power source is working properly.
Unit showing no power
2. Ensure all wiring is connected properly.
indication
Unit making humming
1. Replace defective capacitor with new one.
noise / motor not
2. Check / replace defective motor.
Starting
``

PART LIST / REPLACEMENT

PART LIST / REPLACEMENT
13