Table of Contents
Advertisement
Quick Links
User's Manual
WS-4830SS WS-4836SS
WSC-4630SS WSC-4636SS
NOTE: PLEASE INSPECT HOOD
IMMEDIATELY UPON RECEIVING.
CLAIM OF DAMAGE AFTER 7
DAYS OF DELIVERY WILL BE
DENIED.
This unit is designed for indoor
residential use only. DO NOT USE
OVER A WOOD GRILL OR MOUNT
IN OUTDOOR ENVIRONMENT.
Please read this operation manual thoroughly before
using your range hood. Store it in a safe location for
when you need to reference it in the future.
www.windsterhood.com
Advertisement
Table of Contents
Related Manuals for Windster WS-4836SS
Summary of Contents for Windster WS-4836SS
- Page 1 User’s Manual WS-4830SS WS-4836SS WSC-4630SS WSC-4636SS NOTE: PLEASE INSPECT HOOD IMMEDIATELY UPON RECEIVING. CLAIM OF DAMAGE AFTER 7 DAYS OF DELIVERY WILL BE DENIED. This unit is designed for indoor residential use only. DO NOT USE OVER A WOOD GRILL OR MOUNT IN OUTDOOR ENVIRONMENT.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Table of Contents Safety Information .............. 2 – 3 Content Checklist ..............4 Measurements ................5 Preparation ................. 6 – 7 Installation ................8 – 9 Operation & Features ............. 10 Step by Step Diagram ............. 11 Cleaning &... -
Page 3: Safety Information
SAFETY INFORMATION SAFETY INFORMATION TO REDUCE THE RISK OF A FIRE, ELECTRICAL SHOCK, AND/OR INJURY OBSERVE THE FOLLOWING: Unit is intended for indoor residential use only. If you should have questions, contact the manufacturer at the address or telephone number listed in the warranty. - Page 4 SAFETY INFORMATION TO REDUCE THE RISK OF FIRE, OR ELECTRIC SHOCK, DO NOT USE THIS FAN WITH ANY SOLID-STATE SPEED CONTROL DEVICE. Regardless of heat level, never leave any surface materials unattended while operating an open flame. Always turn hood ON when cooking at high heat or when flambéing food (i.e. Crepes Suzette, Cherries Jubilee, Peppercorn Beef Flambé).
-
Page 5: Content Checklist
CONTENT CHECKLIST CONTENT CHECKLIST CONTENTS INCLUDED (1) WS(C)-48(46) series (30” or 36”) hood assembly (1) User’s manual (1) Black 6” to 7” conversion collar (2) Magnetic baffle filters (30” model only) (3) Magnetic baffle filters (36” model only) (1) Screw packet CONTENTS NOT INCLUDED WS(C)-48(46)CFMR (CFM reducer) WS46RVK (Rear vent kit) -
Page 6: Measurements
MEASUREMENTS... -
Page 7: Preparation
PREPARATION PREPARATION BEFORE YOU START **DO NOT INSTALL IF DAMAGED** **RETURN OR EXCHANGE WILL BE DENIED IF INSTALLED** Be sure you have all the content of your purchase and required tools for this installation. Installation may take at least 2 to 3 hours from start to finish. Plan to use as few elbows or turns as possible for more efficient air flow. - Page 8 PREPARATION For cabinet with recessed-bottom, use (2) 3” x 12” or 15” wood strips on both sides to balance the recession. Use (4) 1-1/4” long flat head screws to secure the wood strips to cabinet. (Fig. 1d) HOOD Inspect for any sign of defect or damage. (ie. scratches, dents, loose seams, etc.) Power up the unit to make sure it is working properly.
-
Page 9: Installation
INSTALLATION INSTALLATION 1. UNDER CABINET INSTALLATION (Top round outlet) Make sure all preparation steps are completed. Feed the wires coming out of the hood through the bottom of the cabinet. Lift the unit up flush against the wall and bottom of the cabinet. Using the screws and washers provided, insert into each of the keyhole openings and tightly secure the unit against the bottom of the cabinet. - Page 10 INSTALLATION UNDER CABINET INSTALLATION (Rear rectangular outlet) (Optional) Make sure all preparation steps are completed. Be sure you have the WS38RVK (rear vent kit) to change the top round outlet to a rear rectangular outlet. Convert 6” top round to 3-1/4” x 10” rear rectangular. Replace the 6”...
-
Page 11: Operation & Features
OPERATION & FEATURES OPERATION & FEATURES EASY ACCESS CONTROL SWITCH (from left to right) WS-48 WSC-46 Button 1 – ON / OFF Button 1 – ON / Delay Shutoff Button 2 – 1 speed / OFF Button 3 – 2 Button 2 –... -
Page 12: Step By Step Diagram
STEP BY STEP DIAGRAM... -
Page 13: Cleaning & Maintenance
CLEANING & MAINTENANCE CLEANING & MAINTENANCE WARNING!!! To prevent the possibility of a fire and explosion, do not use flammable liquids or solvents to clean the unit or any of its parts. Check to make sure all power sources are disconnected before servicing or taking unit apart for cleaning. -
Page 14: Troubleshooting
TROUBLESHOOTING TROUBLESHOOTING WARNING!!! Check to make sure all power sources are disconnected before starting any troubleshooting. Safety gloves and glasses should be worn when working on the unit. Serious injury or death may occur if safety precautions are not followed. WS(C)-48(46) Series GU10 LED Light Issue 1. -
Page 15: Part List / Replacement
PART LIST / REPLACEMENT PART LIST / REPLACEMENT... -
Page 16: Warranty / Contact Us
For a period of one (1) year from the date of purchase, if the product is determined to be defective, Windster will attempt to repair the product, at its option, at no charge. After the warranty period, customer must pay for all labor charges. During the "labor"... - Page 17 Damage resulting from natural disasters (earthquake, flood, storm, etc.) Aluminum Filters, Baffle Filters, Charcoal Filters, and Oil Cup Filters GU10 LED lights CONTACT US Windster Hoods, Inc. www.windsterhood.com Information subject to change without notice...