Table of Contents
Advertisement
14
CLEANING & MAINTENANCE
CLEANING & MAINTENANCE
WARNING!!!
To prevent the possibility of a fire and explosion, do not use
flammable liquids or solvents to clean the unit or any of its parts.
Check to make sure all power sources are disconnected
before servicing or taking unit apart for cleaning.
Please thoroughly clean the unit weekly as stainless steel
can rust under certain condition or by improper cleaning.
1.
RANGE HOOD
a.
Use household cleaner to remove grease or dirt from the outer shell of the
unit. Spray on wiping cloth or sponge and wipe in the direction of the grain
to avoid scratching the unit. (DO NOT SPRAY DIRECTLY ONTO UNIT)
b.
Clean the inner working of the unit periodically to avoid grease build-up.
c.
Do not open control switch panel while the hood is connected to power.
d.
Use stainless steel cleaner to bring back the luster of the unit.
2.
ALUMINUM FILTERS / BAFFLE FILTERS
a.
Remove filters from unit and place in warm soapy water.
b.
Clean each filter regularly to maintain efficient suction power.
c.
Do not drop filters.
d.
Let it soak thoroughly and then clean it with a wiping cloth or sponge.
e.
Filters may also be cleaned using residential dishwasher.
15
TROUBLESHOOTING
WARNING!!!
Check to make sure all power sources are disconnected
before starting any troubleshooting. Safety gloves and glasses
should be worn when working on the unit. Serious injury or death
may occur if safety precautions are not followed.
WS-50E Series
GU10 LED Light Issue
1. Replace old defective GU10 fixture with new GU10
(One light not turning on
LED 5W light fixtures found for your convenience at
or all not turning on)
your local hardware store.
Speed indicator not
1. Complete control switch replacement is required.
showing speed levels
Burnt/melted control
1. Complete Control switch replacement is required.
switch
Speed levels not
1. Check all wiring to and from the unit.
working correctly
2. Complete control switch replacement is required.
1. Check ducting for foreign object.
Unit lacking smoke
2. Ensure the ducting is properly sealed.
intake
3. Clean filters to increase airflow.
Unit showing no power
1. Make sure the power source is working properly.
indication
2. All wiring is connected.
Unit making humming
1. Replace defective capacitor with new one.
noise
TROUBLESHOOTING
Advertisement
Table of Contents
