Troubleshooting - Windster WS-6730SS User Manual

TROUBLESHOOTING

12
WARNING!!!
Check to make sure all power sources are disconnected
before starting any troubleshooting. Safety gloves and glasses
should be worn when working on the unit. Serious injury or death
may occur if safety precautions are not followed.
LED Light Issue
(One light not turning on
or all not turning on)
Filters loose
Control Knobs not
working correctly
Speed levels not
working correctly
Unit lacking smoke
intake
Unit showing no power
indication
Unit making humming
noise/ motor not starting.
/Lights operating
correctly.
WS-67 Series
LED Light
1. replacement is required.
1. Ensure inside springs are properly expanded
1. Control Knob replacement is required.
1. Control Knob replacement may be required.
2. Motor replacement may be required.
1. Make sure a reducer has not been installed.
2. Check ducting for foreign object.
3. Ensure all ducting is properly sealed.
4. Maintenance may be required to increase air-flow
1. Ensure 120v electrical power source is working
correctly.
1. Capacitor replacement is required.