Troubleshooting; Parts List / Replacement - Windster LINER WS-69TB30 User Manual

14

TROUBLESHOOTING

WARNING!!!
Check to make sure all power sources are disconnected
before starting any troubleshooting. Safety gloves and glasses
should be worn when working on the unit. Serious injury or death
may occur if safety precautions are not followed.
WS-69 Series
GU10 LED Light Issue 1. Replace old defective GU10 fixture with new GU10
(One light not turning on LED 5W light fixtures found for your convenience at
or all not turning on) your local hardware store.
Filters loose 1. Ensure inside springs are properly expanded
Control Knobs not
1. Control Knob replacement is required.
working correctly
Speed levels not 1. Control Knob replacement may be required.
working correctly 2. Motor replacement may be required.
1. Make sure a reducer has not been installed.
2. Check ducting for foreign object.
Unit lacking smoke
3. Ensure all ducting is properly sealed.
intake
4. Maintenance may be required to increase air-flow
1. Ensure 120v electrical power source is working
Unit showing no power
correctly.
indication
Unit making humming
noise/ motor not starting.
1. Capacitor replacement is required.
/Lights operating
correctly.
TROUBLESHOOTING

PARTS LIST / REPLACEMENT

PARTS LIST / REPLACEMENT
30" 36"
# Description
1 6" round collar
2 Hood body assembly
3 GU10 5W LED lights
4 Light cover
5 Capacitor
15
42" 48"
# Description
6 Control knob
7 Motor
8 Oil tray
9 Baffle filters