Resetting The Logger - CONTROL SOLUTIONS LogTag VFC400-USB Product User Manual

Resetting the Logger

Resetting the Logger
You can reset a VFC400-USB back to its original
be started again.
When performing this procedure all recordings and statistics stored in the logger
are irrevocably deleted and cannot be recovered. Please ensure your data has
been saved!
All configuration settings in the logger are retained.
For this process to work, the logger must be
.
STOPPED
Press and hold the
START
symbol will turn on.
READY
When the symbol turns off, release the
STOPPED
button within 2 seconds. The logger is now ready to
be started again.
If the button is released while
disappears, the display shows
means, the data from the previous trip is still accessible.
The ability to reset a logger is enabled or disabled in the
configuring the VFC400-USB via Control Solutions VTMC.
VFC400-USB User Guide
button. The
/CLEAR/STOP
is still , or you wait until the
STOPPED
again, and the logger remains stopped. This
STOPPED
state. Once reset, recording can
READY
Advanced Settings
61
symbol
READY
tab when