CONTROL SOLUTIONS LogTag VFC400-USB Product User Manual page 18

Preparing a VFC400-USB for first use
Once an alarm has triggered, the alarm indicator ( ) remains shown until the unit is
reconfigured. The day alarm marker
and the marker for the previous day is shown (
against what is now the previous day. When midnight passes next, this marker will
move to and so on.
Alarm Re-triggering
A note on alarm re-triggering:
corresponding delay time (but not any others) resets to zero and alarm
processing starts again. The alarm processing for all other alarm delays is not
affected. Therefore, accumulative or consecutive alarms will re-trigger, if the
alarm conditions are met again, and the Alarm Indicator ( ) and the Day Alarm
Marker ( ) will be shown, even if any previous alarm was cleared. Clearing an
Alarm does not reset any of the delay values.
VFC400-USB User Guide
remains shown until midnight, then it turns off
) to indicate the alarm was registered
As soon as an alarm is triggered, the
18